Grey Heat-Shrink 3:1 SMALL

Heatshrink has never looked that good before! Enjoy this medium grey shade with a beautiful smooth and matte surface, extra thin walls and extreme overexpansion (5:1) capabilities.

30 cm (1 ft) of MDPC Heat-Shrink 3.3:1 Grey. Before shrinking it has an initial diameter of 6.4 mm and goes down to 1.9 mm after shrinking.
If you need larger quantities of Grey heat-shrink SMALL, please use the separate offering in the heatshrink SMALL Spools category.

This heatshrink covers the typical application range for MDPC-X SMALL and XTC cable sleeving. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving.

With a long nosed plier inserted into the heatshrink to widen (overexpand) the inner diameter, you can easily and safely reach an ID of 10.0 mm - resulting in a shrink ratio of almost 5:1! Enjoy a class of its own when it comes to heatshrink.

This heat-shrink has a dielectric strength of 22 kV/mm and an initial shrink temperature (Min) of only 90°C. The constant operating range at temperatures from -60°C to +140°C allows it to be used safely in many environments. Its extremely good short term resistance to fire is especially important for the “shrinkless” melting technique.

Enjoy a class of its own when it comes to heat-shrink.