4-pin FAN HOUSING - 8 crimps

4-pin FAN Housing with 8 crimp terminals:

This 4-pin fan housing can be used to extend fan cables and similar. It is compatible with 4-pin fan connectors (both types of locking ramps compatibility: Both ramps on outer positions or the "3-pin" positions) and also with 3-pin fan connectors! How to insert and extract the crimp terminals into and from your fan housing is shown in the additional gallery photos.

We only offer the connectors in combination with the corresponding crimp terminals, to avoid any incompatibilities on your end. One connector needs 4 crimp terminals, but we add twice as much: Per connector you get 8 crimp terminals (e.g. 5 connectors come with 40 crimp terminals, 10 with 80 etc.). You crimp them in the smallest slot opening of our CTX-3 crimping tool. It works with wire ranging from 26 to 22 AWG and with a small trick (strip the wire longer, so you also crimp the "insulation crimp" onto the conductor too) you can also use them with our 17 AWG wire.